Have you ever wanted to play bass guitar but didn’t want to shell out the money for one? You need not fret! Acoustic guitars can be converted into a bass guitar. This article will outline the step-by-step process on how to convert acoustic guitar to bass. This article will outline the step-by-step process of converting an acoustic guitar into a bass. Remove the strings. Attach 2 sets of strings with nylon fishing wire on both sides of the neck. Drill out holes in the body of your guitar (don’t drill in the sound hole!). Attach a bridge from an old acoustic guitar, or purchase a brand new bridge. Find some extra padding for where your arms will go (you can use foam, fabric, ect.), and glue it onto your guitar body. Buy new tuners for your bass, and install them evenly spaced on both sides of your instrument.
You may also look at our article on How to convert sheet music to guitar tab
The Need for a Bass Guitar
So, you’re interested in the bass guitar, but don’t want to spend a lot of money on one. The easiest way to get your hands on a bass guitar is to convert an acoustic guitar into one. Converting an acoustic guitar into a bass is not as hard as it may seem, and it will save you money.
If you play bass guitar, then you know all about the need for a bass guitar. You can’t just play acoustic guitar and expect to be satisfied with that. If you want to be able to make low notes, this is a great way to do it!
There are many reasons why people buy an acoustic guitar. Some people like the sound of it better than an electric guitar. Others love the simplicity of playing a lower-maintenance instrument. But, if you want to play bass, then you will need to convert your acoustic guitar into a bass.
The process of converting an acoustic guitars takes time and patience, but in the end can give you a unique instrument that will make your music more diverse.
How to Convert Acoustic Guitar to Bass
The process of converting an acoustic guitar to a bass guitar is not complicated. All you will need is some basic tools, and the patience and determination to see it through. First, remove all of the strings from your guitar. Next, attach 2 sets of strings with nylon fishing wire on both sides of the neck. You will want one set on top of the other, but leave enough slack so that they can be tuned separately. Drill out holes in the body of your guitar (don’t drill in the sound hole!). Now you need to find a bridge for your bass guitar–you can either remove the bridge from an old acoustic guitar or purchase a new one. After installing your bridge, make sure to install new tuners for your bass as well. To finish off this step-by-step process, add some padding for where your arms will go (you can use foam or fabric).
Acoustic guitars can be converted into a bass guitar. This article will outline the step-by-step process of converting an acoustic guitar into a bass.
1) Remove all strings from your acoustic guitar
2) Attach 2 sets of strings with nylon fishing wire on both sides of each side of the neck
3) Drill out holes in the body of your acoustic guitar (don’t drill in the sound hole!)
4) Attach a bridge from an old acoustic guitar, or purchase a brand new bridge.
5) Find some extra padding for where your arms will go (you can use foam, fabric, ect.), and glue it onto your electric’s body.
6) Buy new tuners for your bass, and install them evenly spaced on both sides of your electric’s body.
Why Choose the Acoustic Guitar?
The natural beauty of an acoustic guitar is what makes it one of the best instruments to convert. The sound and tone of the guitar can still be maintained even when converted into a bass. This is because converting an acoustic guitar into a bass does not involve altering the body, only adding to it. Acoustic guitars already have a deep resonance and rich sound, so by converting them, you will not loose that quality.
What You Will Need
-An acoustic guitar
-Nylon fishing wire
-Two sets of strings
-Drill
-Bridge from an old acoustic guitar, or a new one.
-Extra padding for your arms
Step-by-Step Instructions
1) Slide the tuners off of your acoustic guitar (you’ll need to reset them later for playing bass).
2) Remove the strings from your acoustic guitar.
3) Cut 2 sets of strings and attach them with nylon fishing wire to either side of the neck.
4) Drill a hole in your body (don’t drill in the sound hole!)- make sure they are evenly spaced across the width of your guitar.
5) Find some padding, glue it onto your guitar body and then reinstall the tuners evenly spaced on each side of your instrument.
6) You can now tune the strings to whatever you want!
Stringing Your Instrument
The first step to converting your guitar is removing the existing strings. Be very careful when taking them out, as you don’t want to damage the bridge or headstock.
1) Unscrew the tuning pegs one by one in a counterclockwise direction
2) Gently remove the string and coil it around your fingers
3) Repeat this process for all of the strings on your guitar
4) Take a closer look at your instrument, and check for any loose pieces that may have come off during this process
5) If you find anything, secure it back with string before moving onto the next section.
6) Unless you’re using nylon fishing wire, purchase brand new strings (or steal some from your other acoustic guitars).
7) Attach 2 sets of strings to both sides of the neck using nylon fishing wire
8) The first set should be close to where you would normally place your index finger and thumb when playing bass guitar. They should be slightly higher than that spot. The second set should be right above those. This way, if you want to switch back to an acoustic guitar, you can just pull on the high set of strings to release tension on them. Now you can enjoy playing a bass!
Finishing Touches to Complete Conversion
The conversion process is not yet complete. You will need to purchase a bass guitar tuner and install it on the headstock of your newly converted instrument. The final step is to cut out the original tuning pegs and replace them with new ones. Next, drill holes in the headstock in order to attach the tuning pegs. String up your new bass, tune it up, and you’re ready to rock.
To do this, you will need:
1) a string winder 2) tuning pegs 3) an electric tuner 4) a strap 5) some picks 6) an amp
1) Use the string winder to tighten your strings. 2) Tune your bass guitar with the tuning pegs and use an electric tuner to make sure it is in tune. 3) Put on the strap and pick up your instrument! 4) Plug in your amp and rock out!
How to convert acoustic guitar to bass FAQS
The conversion of an acoustic guitar into a bass is not difficult. It is, however, time-consuming. If you are not worried about the look of your guitar and only want the sound of bass, then this is a good option for you.
There are many reasons why someone would want to convert their acoustic guitar into a bass. First, it will save money (if you don’t want to invest in a new instrument). Second, if you already have an acoustic guitar and want to play bass, then this is the perfect way for you to do that! Of course, there are so many other reasons as well.
Almost anyone can do this with just a few tools and some patience. You don’t need any prior experience or skills with woodworking or carpentry or anything like that! All you need is understanding of how strings work and how they’re put on an instrument.
Conclusion
Converting an acoustic guitar to a bass guitar is an inexpensive way to create a full-sounding bass guitar. It is a great option for musicians on a budget or for people who are not sure if they want to invest in a bass guitar. Converting an acoustic guitar is also an easy project that can be completed in a short amount of time.
The acoustic guitar is a stringed instrument that is typically played by strumming or plucking its strings. In order to convert an acoustic guitar to a bass, you need to replace the strings and you will need to replace the bridge. This will create tension on the strings and allow you to use the same technique as you would with a bass guitar. With the conversion complete, you will have a bass guitar that is tuned to the same notes as a guitar.
So, do you need a bass guitar? You may not need one, but if you are in a band and want to be the bassist, or if you want to pursue music on a more serious level and have the ability to play both an acoustic and electric guitar, then you should consider converting your acoustic guitar to bass.
After reading this article, you should now know how to convert acoustic guitar to bass. The process is not very difficult, but it does take some time and patience. With the right tools and instructions, it can be done.
