I’ve seen a few different ways to attach a guitar strap without buttons and I’m here to break it down for you. This guide explains how to attach a guitar strap without button. The first way is by using the button hole that is on the guitar strap. First, thread your straps through the loop at the end of the strap and then feed it through the button hole. The other way is by using one of those D-rings that you can find at any fabric store. Thread your strap through both loops on either side of the D-ring, feed it through the button hole, and voila! You now have a guitar strap with no button needed.
Finally, I’ve also seen people use a shoe lace in place of a button to attach their guitar straps. Cut off one end of the shoe lace so that you have more than enough to loop around both sides of your guitar strap plus extra. Thread your straps through both loops on either side of the shoe lace, feed it through the button.
Related Article: How to fix guitar strap screw
The first method is by using the button hole that is on the guitar strap.
First, thread your straps through the loop at the end of the strap and then feed it through the button hole.
The other way is by using one of those D-rings that you can find at any fabric store. Thread your strap through both loops on either side of the D-ring, feed it through the button hole, and voila! You now have a guitar strap with no button needed.
Finally, I’ve also seen people use a shoe lace in place of a button to attach their guitar straps. Cut off one end of the shoe lace so that you have more than enough to loop around both sides of your guitar strap plus extra. Thread your straps through both loops on either side of the shoe lace, feed it through the button hole, and voila! You now have a guitar strap with no button needed.
The second method is by using one of those D-rings that you can find at any fabric store.
Thread your strap through both loops on either side of the D-ring, feed it through the button hole, and voila! You now have a guitar strap with no button needed.
Finally, I’ve also seen people use a shoe lace in place of a button to attach their guitar straps. Cut off one end of the shoe lace so that you have more than enough to loop around both sides of your guitar strap plus extra. Thread your straps through both loops on either side of the shoelace, feed it through the button hole, and voila! You now have a guitar strap with no button needed.
The third method is by using a shoe lace in place of a button to attach their guitar straps.
Cut off one end of the shoe lace so that you have more than enough to loop around both sides of your guitar strap plus extra. Thread your straps through both loops on either side of the shoe lace, feed it through the button hole, and voila! You now have a guitar strap with no button needed.
Understanding buttons and how they can be used.
A button is a small device that is typically used to fasten pieces of clothing together or close a garment. Buttons come in many shapes and sizes, depending on their intended use.
Buttons can be used for decorative purposes, such as attaching the front of a blouse or shirt together. They can also be used for more functional purposes, like keeping the straps of your guitar strap attached to your instrument.
Using buttons for other purposes besides attaching a guitar strap.
Once you’ve removed the button that was used for attaching your guitar strap, there are many other things you can do with it. If you don’t want to use it for anything else, you can add it to a sewing kit or throw it away. However, if you have an extra button and some spare time on your hands, I’ve seen people use buttons in place of the one they just took off their guitar strap.
How to attach a guitar strap without button in three different ways.
The first way is by using the button hole that is on the guitar strap. First, thread your straps through the loop at the end of the strap and then feed it through the button hole. The other way is by using one of those D-rings that you can find at any fabric store. Thread your strap through both loops on either side of the D-ring, feed it through the button hole, and voila! You now have a guitar strap with no button needed. Finally, I’ve also seen people use a shoe lace in place of a button to attach their guitar straps. Cut off one end of the shoe lace so that you have more than enough to loop around both sides of your guitar strap plus extra. Thread your straps through both loops on either side of the shoe lace, feed it through the button hole, and you’re done.
Place the guitar strap on your shoulder
The first step is to place the guitar strap on your shoulder. Make sure that the strap and guitar neck are lined up together on your shoulder. You can make this easier by putting your arm in a slightly bent position.
Toss the end of the strap over the top of your other shoulder
The easiest way to attach the strap to your guitar is by tossing the end of the strap over the top of your other shoulder. Once it’s on your back, slide it across your chest and over to your opposite side. Finish by tucking the strap through the loop on your guitar neck. The strap should now be right in front of you with one end hanging down.
Pull the free end of the strap through the loop that you just created
You want to start with the free end of the strap.
Pull it through and then loop it over your other shoulder.
Pull until a comfortable length is achieved
The first step is to pull the strap until it’s at a comfortable length. You don’t want it too short or too long. Once you have pulled the strap to your desired length, fold the extra material in half and tie a knot. If you notice that the strap is drooping under your guitar, make sure to tighten it so that it will stay up on its own.
Tighten to desired tightness
The first step is to tighten your strap until it’s comfortable. You want to make sure that the strap is tight enough to stay on your shoulder, but not too tight that it’ll cut into your skin when you lean over. Once you’ve reached this point, there are two ways to attach the strap to each end of the guitar.
Tie off the ends with a slip knot and you’re done!
The first thing you need to do is tie off the ends of the strap with a slip knot, like in the image above. This will prevent the two ends from coming undone on accident and make it easy to tighten the strap.
Once you’ve tied off the ends, loop one end of your guitar strap around your guitar neck and thread it through the other end
How to attach a guitar strap without button FAQS
Yes! You can either cut the shoe lace in two or thread it through the hole in the leather.
You can use any type of D-ring of your choice, but the top one is an excellent option.
You can purchase guitar straps with loops already sewn, or you can sew them yourself.
You’ll need to remove the straps with button attachment and replace them with straps that don’t have buttons.
Conclusion
The process is really simple and it won’t take you more than a few minutes. The attach a guitar strap without button process is simple and you can do it in three different ways.
The first way is to use the button hole that is on the guitar strap. The second way is by using one of those D-rings that you can find at any fabric store. The third way is by using a shoe lace in place of a button to attach their guitar straps.
It can be frustrating when you’re in the middle of playing your favorite song and you have to stop to adjust your strap or fix it because it got caught under your guitar. It’s also a pain when you’re teaching someone else how to play a guitar and they don’t know how to get their strap on properly.
