If you want to install speakers in your car but don’t want to deal with the hassle and expense of custom installation, then a flush mount speaker is the perfect solution. Fitting a 6×9 speaker into a space that’s only 6×8 is not as hard as it sounds. If you have a 6×9 speaker that doesn’t quite fit in your 6×8 space, don’t worry. There are many solutions to the problem. You can try moving it back or forward or even rotating it, but sometimes these solutions just won’t work out.
Here are some simple tips and tricks for installing a flush mount speaker into your car.
Related Article: How to Reuse Your Old 5.1 Speakers
Planning to Fit a 6×9 Speaker in a 6×8 Space
Before you go out and buy a 6×9 speaker for your car, find out if the space in your car is 6×8. If you have a 6×10 space, then you can install a 6×9 speaker. But if you have a 6×8 space, then it’s time to get creative.
You’ll need to start by measuring the width of the space where you will be installing the speaker. You don’t want to buy the wrong size speaker because it won’t fit! The easiest way to measure is with a tape measure.
Next, create an opening for the speaker by removing some of the material inside your car. This means removing some of your upholstery or carpeting inside your car. You’ll need enough room for both the speaker and wiring to fit comfortably without being too tight an area.
With these steps, you learn how to Make a 6×9 Speaker Fit in a 6×8 Space.
The next step is cutting some new holes to mount the flush mount speakers on either side of that opening or directly on top of that opening depending on what type of flush mount speakers you are using. Properly cut holes are essential so that no loose wires are sticking out from behind your custom installation job.
Fitting the Speaker
The 6×9 speaker is almost 6 inches wider than the 6×8 space. But this doesn’t mean you can’t make it fit. And this comes with a few tricks, like mounting the speaker backward or installing a smaller speaker to make it fit. You can either mount the speaker backward, which will allow you to install it in the 6×8 space without any modifications. Or, if you’re looking to keep all of your speakers flush-mounted and aesthetically pleasing, then you’ll need to use a smaller speaker. A 4×6 or 5×7 will work great as long as you measure and purchase one that fits into your vehicle’s space and matches the other dimensions of your setup. If you’re not sure whether or not it will fit, then take some measurements before purchasing anything!
Attach the speaker to the mount
The first thing you’ll need to do is attach the speaker to the mount. Most flush mounts come with a double-sided adhesive on the back of the speaker. You want to make sure that it sticks firmly before attaching it to your mounting surface.
Once you have attached the speaker, you can start installing it into your car.
Moving the speaker back or forward
If you just need to move the speaker back or forward, you’ll be able to find an inch or two of room for it. Try pushing it in further than you think you should. If this doesn’t work, try moving it back so that the speaker is touching the wall.
Rotating the speaker
Rotating the speaker is one of the most common solutions to this problem. Just rotate it 180 degrees and you’re good to go! This is an easy fix that won’t require any extra supplies. However, it will take some time for your ears to get used to the sound coming from a speaker in a different corner than usual.
This is one way of how to Make a 6×9 Speaker Fit in a 6×8 Space.
Cutting a hole in the wall
If you have a speaker that has a very thick front and it doesn’t fit in your space, you might be able to cut a hole in the wall. First, take measurements of the speaker’s thickness and the depth of the wall. Cut a piece of drywall or cardboard that is 2 inches bigger than your measurement.
Then take another piece of drywall that is 2 inches bigger than your measurement and slide it behind the first piece. Next, measure and mark where you want to cut the hole for your speaker. Using a jigsaw, cut out the shape and remove any excess material.
You can then install screws or nails to attach both pieces together and cover up any holes with spackle or patching compound.
Creating a false wall
If you’re not able to move either the speaker or the space, try creating a false wall between the two. This is an easy and inexpensive way to make your speaker fit. You can take particle board and cut it to the shape of the speaker.
This will create a false wall that will fill in any gaps between the speaker and your wall. If you want to make this look nicer, paint it so it matches the rest of your room.
Putting up a new wall
The best solution to the problem is to put up a new wall. This is the best option because it doesn’t involve any moving of the speaker and will give you a few extra inches of space. All you need to do is measure and mark where you want your new wall to go.
You can then cut into that area with a saw and create a wide enough hole for your speaker. It’s as simple as that!
Determine how high you want to mount the speaker
When installing your speakers, the first thing that you’ll need to do is determine how high you want to mount the speaker. If you’re mounting flush with the top of the door panel, then measure from the top of the door panel to where you want to mount your speaker.
Some people prefer to have them set up so they are only one inch away from the door panel. This may be good if you are using a subwoofer because it will allow for a better bass response. However, this may not be as aesthetically pleasing since it doesn’t allow for much space between your car’s interior and exterior. You can always paint or customize your car’s panels, but this option isn’t free.
If you want to have some space between your speaker and your car’s interior, then make sure at least three inches are available before cutting out a hole for it.
The most popular mounting location is about four inches below the top of the door panel on either side of the window frame. This gives enough clearance for most speakers without sacrificing too much headroom in your vehicle since most speakers are only an inch or two taller than that measurement.
Another option is to mount them higher up on either side of the window frame which leaves more space beneath them for storage, but this also means that there will be less headroom in your vehicle — perfect for those with lots of gear!
Secure the speaker with screws
or bolts
One of the first things you need to do is find a way to secure the speaker and give it a base. There are a few ways you can do this:
-Use screws or bolts: Use wood screws to attach the speaker to your car’s metal frame, or use bolts to attach it to a plastic frame.
-Attach with Velcro strips: Attach two Velcro strips on either side of the speaker and attach it to your car’s door. This will create temporary stability for your speaker until you can get more permanent ones installed.
-Attach with staples: Use staples or paperclips to attach the speaker in place. You can use these temporary attachments until you get something more permanent.
Installing Grilles
One of the first things to do when installing a flush mount speaker is to install the grille. Grilles are specially designed for flush-mount speakers, so it’s important to get one that fits perfectly. The grille is installed by placing the speaker face down and connecting it with screws. Next, you need to secure the grille and crossbars together and then tighten everything into place.
FAQs
The hole needs to be cut to the size of your speaker grille.
Cutting a larger-sized hole can be done by using a drill and cutting bit. A jigsaw may also work, but it can be more difficult because the edges need to be smoothed out.
Yes, you can make your grille to fit flush-mount speakers, but this generally isn’t recommended due to high costs and the difficulty of installation.
Conclusion
Speaker placement can be a complicated process. The key to a great sound is to position your speaker about a foot from the wall and at ear height. One way to accomplish this is by installing a false wall or building a new wall.
Another option is to hang the speaker on the wall or place it on a stand. If you want to place the speaker closer to the floor, you will need to move it back or rotate it to point at the center of the room. If you want to place the speaker in front of a window, you will need to take off the grill and cut a hole in the wall.
3 thoughts on “How to Make a 6×9 Speaker Fit in a 6×8 Space”
Comments are closed.