Speakers don’t just appear out of nowhere: There’s a lot that goes into getting a speaker to perform its best. You’ve got to select the right material for the voice coil and the tweeter to match the rest of the speaker. But really Do Speakers Really Break-In?
You’ve got to get the crossover and the woofer correct. You’ve got to seal the cabinet carefully, or else sound waves will leak out. You’ve got to put the whole speaker together properly, or else it won’t work. And you’ve got to break it in.
In this article, we’ll take a look at why you need to break a speaker in, and what you can do to do it.
Related Articles: How to force sound through speakers
What exactly is breaking in a speaker?
Speakers break in much the same way as an amplifier does. As the voice coils move back and forth, they change the magnetic fields that the speakers create in the air.
This is what gives you a bass boost when you crank up a subwoofer, or a boosted mid-range. The optimal way to break in a speaker is to play a continuous, loud tone through it for extended periods of time. If you follow the steps below, you’ll be able to do it easily in your own home.
How to break in a speaker?
As you break in your speakers, remember to keep them clean and dust-free. Don’t allow dirt and dust to accumulate in the speaker cabinet, and clean the speakers regularly. And remember: The cleaner the speakers, the better they’ll sound!
One of the best ways to break in a speaker is to use a special speaker-break-in box. These boxes have speakers with their voice coils unshielded, and they allow them to move freely as you break them in.
You’ll want to select a speaker-break-in box with a conservatively rated amplifier and a subwoofer that has a low-pitched, deep bass tone.
To break in a speaker, start by gently playing the speakers on your system
The first thing you need to do is to play your speakers on your system. You don’t want to play the loudest, most punishing music through your speakers, but gradually turn the volume up until the speakers can no longer play at their normal volume.
Once your speakers can no longer play at their normal volume, it’s time for the next step: Put on your favorite music and turn your volume up as loud as it can go. The idea here is to be able to play the same piece of music at the same volume for hours on end.
When you’re done breaking in your speakers, there are some things you can do to make sure they last as long as possible. If you have the budget, you can purchase a speaker-life-extension box and play music at lower volumes for longer periods of time.
This will ensure that your speakers last even longer. Or you could purchase some protective grilles and cabinet caps, or even a custom speaker cover.
What can be broken in a speaker?
The process of breaking in a speaker involves playing a continuous, loud tone through it for extended periods of time. So, what exactly can you break in a speaker?
With a subwoofer, you can play any type of music—from classical, to rock, to country, and everything in between. If you want to break in a speaker with a bass-heavy sound, you’ll want to play your favorite bass-heavy music.
You can also break a speaker by playing white noise or pink noise. White noise is a continuous tone that’s completely devoid of any audio frequencies. Pink noise is a continuous tone that’s made up of all the frequencies, including bass frequencies.
The ideal way to break in a speaker is to play it through a speaker-break-in box. This box has speakers with their voice coils unshielded, and it allows them to move freely as you break them in. The only other way to break in a speaker is to play it against something that’s completely unamplified
how long do speakers last
The short answer to this question is “very long.” While your speakers might not seem to get any louder with age, the quality of sound will improve over time. In fact, most speakers are designed to sound their best after about a year.
This is because the engineers can’t create perfect sound with perfectly manufactured speakers. As frequency response rolls off, the lower-frequency notes tend to be exaggerated. This will result in a smoother, more accurate response. However, this will only happen once you’re done breaking the speaker in.
speaker break in at low volume
Now that you know speakers don’t just appear out of nowhere, let’s look at the break-in question in more detail. All speakers, even competitors’ products, need time to be broken in. This is because speakers contain magnets, cones, and voice coils.
If you don’t break these components in properly, they will have an adverse effect on the sound quality. For example, a speaker with poorly-vented voice coils will produce more distortion, and the cone may not be able to move as much air.
The first thing to do when breaking in a new speaker is to play the music at low volume. You’ll notice a difference in the sound almost instantly. You can play the same type of music on your system at home, but now it’s at a lower volume.
This forces the speakers to sound different. There’s no “break in period” for the cones and voice coils. They need to sound different straightaway to work properly. Next, you need to break the speakers in with different types of music.
Different genres will create different sound signatures for the speakers. This is why you need different speakers for different types of music. Finally, you need to use the speakers with plenty of hours of use.
This makes the voice coils and cones reach their full potential. That’s why it’s important to take your speakers on road trips, use them at home, and take them to concerts.
Do Speakers Need To Be Broken-In/Burned-In?
The short answer to this question is “no.” The long answer is that some manufacturers recommend breaking in their speakers. While there is no scientific evidence to suggest this is necessary, it might be true.
There are a few reasons why manufacturers might recommend breaking in their speakers. The first is to get rid of any manufacturing defects that might be present. The second reason is to get rid of imperfections in the cabinets or tweeter.
The third reason is to increase the durability of the speakers. The most important reason, however, is to increase the power handling of the speakers.
The power handling of a speaker refers to how much power it can handle before breaking. This will vary depending on the type of music you play on it, but it’s usually around 100-watts. In other words, your speakers can’t handle 200-watts of power, or else they’ll break.
However, the manufacturer might recommend breaking in the speakers to maximize the power handling. This is because breaking-in a speaker will make it sound better. The increased power handling will result in better bass performance, and more accurate treble.
To break in a speaker, start by gently playing the speakers on your system
The first step to breaking in a speaker is to gently play your speakers on your system. You don’t want to play the loudest, most punishing music through your speakers, but gradually turn the volume up until the speakers can no longer play at their normal volume.
Once your speakers can no longer play at their normal volume, it’s time for the next step: Put on your favorite music and turn your volume up as loud as it can go. The idea here is to be able to play the same piece of music at the same volume for hours on end.
When you’re done breaking in your speakers, there are some things you can do to make sure they last as long as possible. If you have the budget, you can purchase a speaker-life-extension box and play music at lower volumes for longer periods of time.
This will ensure that your speakers last even longer. Or you could purchase some protective grilles and cabinet caps, or even a custom speaker cover.
What can be broken in a speaker?
The process of breaking in a speaker involves playing a continuous, loud tone through it for extended periods of time. So, what exactly can you break in a speaker? With a subwoofer, you can play any type of music—from classical, to rock, to country, and everything in between.
If you want to break in a speaker with a bass-heavy sound, you’ll want to play your favorite bass-heavy music. You can also break a speaker by playing white noise or pink noise. White noise is a continuous tone that’s completely devoid of any audio frequencies.
Pink noise is a continuous tone that’s made up of all the frequencies, including bass frequencies. The ideal way to break in a speaker is to play it through a speaker-break-in box.
This box has speakers with their voice coils unshielded, and it allows them to move freely as you break them in. The only other way to break in a speaker is to play it against something that’s completely unamplified.
FAQs
Yes! The process of breaking in a speaker involves playing a continuous, loud tone through it for extended periods of time. So, what exactly can you break in a speaker? With a subwoofer, you can play any type of music—from classical, to rock, to country, and everything in between. If you want to break in a speaker with a bass-heavy sound, you’ll want to play your favorite bass-heavy music.
No, but you can still break it in! The process of breaking in a subwoofer is exactly the same. You need to play a continuous, loud tone through it for extended periods of time.
Since the process of breaking in a speaker involves playing a continuous, loud tone through it for extended periods of time, it’s difficult to say exactly how long it will take. Depending on the type of music you play and the volume you play it at, it could take a few weeks or it could take a couple of months.
Conclusion
From now on, your speakers will sound better and better with each passing day. That’s because they will have been broken in. The break-in period will make the speakers sound more accurate, and more powerful. This means that you will be able to enjoy your music to the fullest, and the music will come through loud and clear.
