One of the challenges of playing guitar is keeping the notes in a clear and consistent tone. This is especially challenging when you’re playing with an amplifier.
There are a variety of ways to get power to your amplifier, but the one that’s most prevalent for electric guitars is sending the signal to the amp through a guitar cable. However, sometimes it’s not as simple as that.
When you’re playing with a pickup or an acoustic guitar, you’re probably sending the signal through an amp direct. However, if you’re playing through a guitar amp, this isn’t always the case.
If you’re using a signal chain, you’ll be adding in effects, pedals, and delays before you get to your amp. Therefore, your signal needs to pass through these as well.
This can be a little tricky at first, so we’re going to explain how to use send and return on guitar amp this guide.
Related Article: How to pack a guitar amp for shipping
Add your effects to your amp with the send and return
The way that effects work on a guitar amp is by sending your signal to an external device, like a delay pedal. Then, they pump that sound back into the amp. This lets you add all sorts of effects to your amp without having to worry about which pedals you’ve got in your chain. This can be very beneficial because it will make it easier for you to find the sound that you’re going for when playing live. You won’t have to worry about running out of space on your pedalboard or anything like that. You’ll be able to do all of these things with just your amp, which will make it easier for you in the long run as well!
Make an effect loop
One of the simplest ways to use a send and return is to run your effects through it. This is especially helpful if you have more than one pedal you need to plug in. You can set up an effect loop by running your guitar signal into a pedal, then sending it back out of the pedal and into another one. This process continues until all of your pedals are plugged in.
For example, say you want to run your guitar sound through a delay effect. First, plug in your send cable into the input on your delay pedal and plug the output from that pedal into the input on your amp’s send jack. Next, plug the output from your amp’s foot switch into the return cable on any other effects pedals you might want to use. Finally, plug that same delay’s output back into its own input for an infinite loop of repeats. Now when you hit the foot switch on your amps foot switch, it will activate both effects pedals at once for a custom sound!
Use a send and return to control your amp remotely
The ability to remotely control the sounds coming out of your amp is another reason why digital marketing is important. Let’s say you wanted to set up a sound system for a party and you didn’t want to be in charge of the amp too. With a send and return, you could set up a feed into a channel on your mixing board and then set it so that when you play back whatever channel is feeding your audio into, it will come out of your amp. This would allow you to control anything that comes out of the mixer without having to worry about whether or not you have the right connections or any other technical troubleshooting. You can also use this feature as an echo effect for vocals by setting up two microphones and sending one microphone’s signal into the other microphone’s input. This would cause an echo effect from one microphone into the other microphone.
Create pitch-changing effects with a send and return
A great use for the send and return is to create pitch-changing effects. Pitch-changing effects are a lot of fun, but they can also be used to enhance your guitar playing when you’re playing with other instruments. For example, if you want to play chords on your bass while your guitar is singing through a delay pedal, it can be really difficult to play them in time with one another. If you have a send and return set up, this problem is solved because you can direct the output from the delay pedal into the send input of your amp so that it only affects the sounds coming out of your amp. This will make it sound like your guitar is singing through a delay pedal even though it’s actually not affected by the delay pedal at all.
Add a delay effect to your guitar with a send and return
If you want to use a send and return to run your guitar through a delay effect, then you’ll need the following:
-A guitar amp
-A cable with an instrument input and an output
-An interface that has a send and return feature
-A delay pedal (like the Boss DM-2)
Here’s how to do it:
The first thing that you’ll need to do is connect the output of your guitar amp to the input of your interface. Then, connect the output of your interface to the input of your delay pedal. Connect your delay pedal’s output to the input on your amp. You’re now ready to play! When you’re playing, use your amp’s controls or effects pedals (or both!) to regulate how much delayed signal gets back into the amp. The more delayed signal that goes back into the amp, the more echo you’ll get.
Use a send and return to record your bass guitar and use your amp as a monitor
Use a send and return to record your bass guitar and use your amp as a monitor. If you’re recording a band, it can be difficult to find the right amount of bass in the mix. With this technique, you’ll be able to hear the sound of your bass while recording through your amp. It’s important to only use one speaker for this technique, as using both will create an echo effect. Simply plug the send wire coming from your bass into the input on the send channel, then plug the return wire coming from the output on your amp into a separate speaker. Your amp should still be set on a low volume for this technique. Now, when you play your bass with both speakers playing, one will go through your instrument and come out of the other speaker that’s set up for monitoring. The sound from your monitor will come back into your amp through the monitors’ return wire and be amplified again by your amp so you can hear it better. You’ll need to turn off any reverb or effects that are on to prevent reverberations in your monitor speaker while recording or else they may bleed over into the track that you’re recording.
Make the most of the studio monitor function with a send and return
When you’re recording or mixing your music, it’s important to know what it sounds like in the studio. Studio monitor speakers are designed to help you hear your music the way that it’ll sound when it’s played back. Typically, these monitors will have a send and return function. So, plugging into one of the inputs and then sending that signal elsewhere is as easy as giving your amp an auxiliary input. This will allow you to apply effects directly to your amp without sacrificing quality or taking up extra channels on your mixer. For example, if you wanted to run your guitar through a delay effect without having to sacrifice a channel on your mixer, this would be a good option. You could hook up an aux cable from the input on the monitor to the instrument input on your amp and then adjust the delay settings accordingly.
If you want better clarity in what comes out of your amp, these monitors are worth checking out! They’ll provide you with an idea of how everything will sound in a live setting so that you can make better decisions while mixing or recording.
Why is it important to use a send and return on an amp?
A send and return is important to use on your amp because it lets you use the features of your amp separately. You can run the sound coming out of your amp through a separate effects pedal or amplifier, which means you can create interesting effects that would be impossible with just your selected amps features. For example, you could run the sound of your amp through an overdrive pedal and then run that sound back to go through an octave pedal, which would make the sound coming out of your amp sound like a synth. This would be impossible without using a send and return.
What’s the difference between the send and return buttons on an amp?
If you’ve ever heard of a send and return, it’s likely because you use them in a recording studio, where they are used to control levels.
The send button is what turns on the sound coming from your guitar amp. When you do this, it will also turn on your effects and any other devices that are part of your signal chain.
The return button takes the signal and then sends it back to the amp. You can use these buttons separately or stacked. If you have a separate send and return, this means each will be on their own channel while the return is routed through an input jack on the front of your amplifier to the amplifier’s speaker output jack. The return button is typically found at the back of your amp. When using them together, as with a stackable send/return setup, both controls are stacked together to make routing easier. This will allow you to control both parameters without having to reach around for different dials when switching between channels.
Proper Usage of the Send and Return Buttons
There are two types of amps that you can use: the type that are connected to your guitar during play and the type where you amplify your guitar signal outside of the amp. Both have their benefits, but it’s important to know how they work.
The send and return buttons on your amplifier will be used differently depending on which one you’re using. In this post, we’ll focus on sending a guitar signal through a new amplifier with these two buttons.
**In this case, the send button is used to turn on an effect or pedal in the chain before it reaches your amp.
**The return button is used for turning off an effect or pedal after it has been processed and sent through your amp.
This might seem a little confusing at first, but don’t worry–we have a diagram showing what we mean:
How to use the send and return functions on your guitar amp
If you’re using a signal chain, you’ll be adding in effects, pedals, and delays before you get to your amp. Therefore, your signal needs to pass through these as well.
This can be a little tricky at first, so we’re going to explain how it’s done in this guide.
To send the signal to the amp’s return channel instead of amplifying it, connect the guitar cable to the input jack on your amp and set the knob on that channel all the way up. This will tell your amp which channel is active. Then, crank up the volume on that channel to the desired level. For instance, if you have an overdrive pedal before your amplifier and want it at full blast when playing through a clean setting, then turn it all the way up. You should also adjust this volume while playing with distortion as well because distortion changes how much of an effect each sound has on another within a circuit-meaning your guitar might not sound as powerful when distorted if you don’t compensate for that change in volume.
Next, go to the other end of your guitar cable where the output is located and plug it into one of two places: either a tuner or an effects pedal. If you want to use a tuner for tuning purposes only (or just generally) then connect it into effect pedal slot number one; if you want to use an effects pedal as part of your
Pros and Cons of using send and return on your guitar amp
This type of setup is good for adding different effects to your sound. This can make your sound more interesting and give it a smoother tone.
One of the downsides, however, is that you’ll have to turn up your amp more to get the same volume.
The other downside, which may not be as big of an issue for some, is that you’ll need to be sure not to overdrive your amp with this setup.
How to use send and return on guitar amp FAQS
A send is the output of your guitar signal from one piece of gear and input to another.
A return, also known as a feedback loop, is the input from one piece of gear to another. This can be an input to an amp or an effects pedal, for example.
To use a send and return on your amp, all you need to do is plug in the cables. Connect one cable from your amp’s output to the input of your effects pedal, with the other end of that cable running back out of the pedal and into your amp’s input. After that, connect another cable from the output of your effects pedal to an input on your amp. That will create a loop that goes from the input of your effects pedal to its output and back into the input of your amp. You can tweak this loop by changing how much volume is going through it; you can adjust this amount by increasing or decreasing how much volume is going through it on either side: at the input or at the output. It’s advisable to start by keeping both volumes around 50 percent so you can hear what changes happen when you turn them up or down.
Conclusion
The send/return is an important part of the process of shaping your guitar sound. It gives you the chance to control how much of the sound is processed and how much is sent through the effects loop.
In this article, are some tips on how to use send and return to your advantage, as well as some warnings about what you should and shouldn’t do when using send and return.
