How To Remove Mold From Speakers

Speakers are a great way to share information and ideas. But if you want them to last longer, you need to clean them regularly. This includes learning How To Remove Mold From Speakers. A speaker can last up to 10 years if it’s kept in good condition, but if it’s not cleaned, the sound quality will start to decline and the speaker will eventually need to be replaced.

Surprisingly, that’s just with normal use! If you want your speakers to last even longer, you need to get them certified by a professional speaker cleaning company. Not only will they clean your speaker and make it look and sound better, but they also offer warranties against any defects in their work.

Related Article: How to Clean Mold off Speakers

Introduction to Speakers

Speakers come in all different types, shapes, and sizes, and of course there are three basic types of speaker cones, the woofer, mid-range, and tweeter, which is also known as the voice coil.

We’ll talk about the different kinds of woofers and their materials and properties later, but for now it is important to realize that there is really only one way to remove the moulding that can become attached to the outer covering of a woofer. This is very simple to do, and takes all of about 15 minutes.

So, let’s take a look at the basics of speaker cones.

What Are Speaker Cone Materials?

The woofer cone is made of paper, aluminum foil, or paper-like plastic. The plastic makes the woofer cone lighter and much more efficient at transmitting sound waves through the cone to the listening ear.

What makes a good speaker?

A good speaker should be as powerful as the speaker itself. There should be nothing holding it back from delivering powerful sound and projecting great sound quality. On the other hand, it should also be able to produce a wide range of audible sound frequencies. In other words, it should be able to cover the range from the very low notes to the highest peaks of the spectrum.

There should also be a consistent high volume output. If you’re holding a 50 watt speaker next to a 120 watt speaker, they should output the same volume level. If one is louder than the other, it’s going to be too much for your ears. In this case, you might have to either cut back on your volume or turn up the bass levels in your stereo system.

How do I clean my speakers?

A lot of people buy speakers without doing anything to them other than plugging them into an amplifier and pushing play. Many of these speakers do need to be cleaned regularly. There are lots of different cleaning methods and different things that need to be done.

There’s two main kinds of speakers you have to worry about: wired and wireless. Most of your wired speakers have a cord that comes out the back. To clean your speaker, you need to unscrew the back of the speaker and get at the wires. You’ll need to disconnect the speaker from the wires and the amplifier (if you have one) and unscrew the face plate of the speaker to get at the base of the speaker. You’ll want to empty out the inside of the speaker and clean it inside and out.

How To Remove Mold From Speakers

How to Store and Use Speakers

In order to keep your speaker from mold growing inside of it, you must make sure that it is not exposed to water. There are a few things you can do to keep your speakers dry. It is important that you store your speakers somewhere they will not get wet, and you should avoid any time of the year where the air is humid.

See also  How to Cut Holes in Fiberglass Boat for Speakers

If your speakers are not placed in a cabinet or placed on a stand, they can be subjected to moisture and dirt. Additionally, if you are going to be placing the speakers on a countertop, you can place something under them to keep them from sitting in water. If you want to keep your speakers off of the floor, you can place a layer of something like plexiglass in between the speaker and the floor.

What is mold and why should it be removed?

Mold is a fungus that can grow on many different materials. It can be a harmful as well as a non-harmful, depending on the material it’s growing on.

Mold is the name given to a category of molds that also includes lichens, oomycetes, and histocystophora. Some of these molds are dangerous because they can damage or destroy an object’s structure, cause it to rot, or destroy its function in some way. For most speakers, mold is the first step toward either of those things.

Mold is produced when organic material becomes contaminated with airborne chemicals that are harmful to the material. A fungal infection known as Aspergillus blight commonly produces white, or yellow, spots on the exterior of speakers as well as inside the enclosure.

How do you remove mold from speakers?

No matter what you’re trying to remove mold from your speakers, there are a few things you should keep in mind. Molds are notoriously hard to remove, even if you follow the directions on the packaging for their removal.

A common misconception is that you should use WD40 to remove mold from speakers. What it does, is prevent the mold from adhering to the speaker. Some other suggestions for removing mold include Lysol, lemon juice, and vinegar. These methods may be helpful for removing some mold, but often leave behind sticky residue, which can be difficult to remove.

While these may be effective at removing some mold, they often leave behind stubborn residue.

The best way to clean your speakers

How To Clean Your Speakers: Cleaning Products

Before You Start

The important thing to remember is to not use anything that has been tampered with. This is especially true for “basic” cleaners, like vinegar, baking soda, and water. The most common cleaning products used on speakers are the following:

See also  10 Best Bookshelf Speakers Under 500 Dollars in 2022

Cohesive cleaner: Will clean resin from drivers. You should never use this on your drivers, though.

Sound-gathering/dust-collection solution: It picks up dust and debris from the inside of the speaker.

Sound-absorbing/moisture-proofing powder: Usually used on home theater systems. Works as a noise-blocking “base” for the speaker and cleans away dirt and dust.

Remove mold from your speakers with the easy way.

Keep in mind that the mold will usually spread from the base of your speaker and not from the plastic casing. For this reason, make sure to use clean tools when cleaning your speakers, such as cotton balls, gloves, and preferably an anti-static shirt.

Follow the instructions below, and you’ll be able to remove mold from your speakers easily and safely.

While most fans and mold are the result of dirt and sweat, it is still possible to develop mold by doing something as simple as handling your speaker with your bare hands. If you have not cleaned your speaker in a while, you may notice mold forming on your speakers.

You can remove the mold from your speakers with the below instructions.

What to do:

Remove the speaker from the mounting bracket.

Get a Speakers Cleaner

The best way to get rid of mold on your speaker is to get a speaker cleaner. They’re available from almost any hardware or appliance store or from Amazon. Just buy a set and take them with you when you entertain guests. The cleaner will be particularly helpful for cars, but it’s also good for rooms with thicker grime.

Get a Mold Remover Tool

When your speaker cleaner starts to give you some problems and you’re unable to use it with all of your speakers, then consider using a mold remover tool. These simple products will remove any mold or wax from your speakers and make them look and sound like brand new speakers.

Place Them in a Conditioner and Heat Spray

Don’t put your speakers in the dryer. If you dry them that way, mold will develop and get deep into your speakers.

Remove Molds with a Furniture Careger

Different types of mold can be removed from different parts of the speaker (loudspeaker + unit + mount). There are all kinds of methods for removing it, but a simple solution is using a furniture careger to wipe away the mold from the speaker. A furniture careger works by removing not just the mold but the bad material that surrounds it. Instead of the poor material going into the garbage, the good materials are gently extracted. Some have advised against using furniture careger on speakers, but it’s often a cheap way to remove the nasty molds without causing damage. There are a variety of different furniture careger types to choose from, and you can even find them at many local retail stores and on Amazon.

Remove Molds with a Home Cleaner.

The easiest way to remove mold from speakers is to use your regular household cleaner. With common cleaning products, it’s easy to do this. Make sure the cleaner you use isn’t toxic or contains chemicals that could harm your speakers.

See also  How to Break Speakers Without Leaving a Trace

Shove your damp speaker through the tube and clean out all the residue inside. After cleaning, tape it back together and stick it back in your wall. Use this method to do this twice a year, just make sure to clean the speaker completely before it goes back in place.

Ask a Therapist.

Maybe you’re worried that making a mess by cleaning out your speakers will ruin the speakers. If so, try talking to a therapist about the problem. Therapists can be an invaluable resource for getting help and giving guidance.

How to prevent mold from forming in your speaker or network system.

1. Make sure your equipment is kept clean and free of dirt, dust, and other contaminants.

2. Avoid leaving your speaker or network system in direct sunlight or on wet surfaces.

3. Keep your speaker or network system covered when not in use to avoid water damage.

4. Do not over-tighten the screws on your panels or cables.

5. Use a properly rated and certified tool to remove mold from your speaker or network system.

6. Restore damaged equipment as soon as possible to its original condition!

What are the benefits of certified speaker cleaning?

Premium brand speakers.

Modest pricing.

Guaranteed defect-free work.

Certified use of only premium, high-quality cleaning products.

How do you remove mold from speakers?

How To Remove Mold From Speakers

Want to learn how to remove mold from speakers and restore them to their original condition? Here are some simple tips and tricks to give your speakers an amazing new look and sound.

Step One:

We’re going to use some simple items like salt, baking soda and paper towels to start the cleanup process. It’s much easier to clean these items before you start applying your cleaners to the speaker. You will have to give the speaker a good rinse so you don’t soak in the products you’re using.

Is certified speaker cleaning worth it?

If you are a music lover who listens to a lot of music and is a light-swimmer, then a certified speaker cleaning company is worth it. Why? You can use these companies to properly clean your speakers without having to call any professional. And that’s important if you want to enjoy the best sound and avoid the damage that can occur.

Conclusion

Mold is an unfortunate reality of owning any product in high humidity conditions. If you have speakers that have become moldy, you should know how to remove. Incase you have a speaker that is free of mold but is damaged from water ingress, you should replace the speaker or have it professionally repaired. If the mold is on the inside of the speaker and is not due to water ingress, you should take special measures to clean the speaker.

While there are no guarantees mold removal can restore sound quality or eliminate how the speaker sounds like, this is a good first step towards improving the overall quality of the speaker.

1 thought on “How To Remove Mold From Speakers”

Comments are closed.