How to Make Your Own Bass Blockers for Speakers

Ever had your ears start to hurt after listening to bass heavy music for too long? If so, then you may be in need of some bass blockers. Bass blockers are a relatively new invention which can help reduce the negative effects of loud speakers on your hearing. But they’re not easy to find!

Do you want to know how to make your own bass blockers for speakers? Here’s how:

Reated Article: How to Stack Speakers

Why you need bass blockers

If you’ve ever been to a concert, or sat in the front row of church, you might have noticed your ears start to hurt after listening to bass heavy music for too long. This is because speakers have different frequencies at which they emit sound. With speakers, the lower frequencies are usually louder than higher frequencies. Some people call this “bass.”

The problem with this is that low-frequency sounds can affect the bones in your ears and make your hearing worse over time, especially if you’re exposed to them all the time. So if you want to protect your ears from loud speakers, getting some bass blockers might be a good idea!

How to make your own bass blockers

The first thing you need is a set of foam ear plugs. Once you have them, cut off the stem so that they’re more like earplugs. Next, insert your earplugs into the speakers and twist them around to cover the whole speaker. This will stop the noise from getting out and hurting your ears.

**Bass blockers are perfect for those with sensitive hearing who want to continue listening to music without having their ears hurt after prolonged exposure.

How to use your new bass blockers

Take a soft piece of fabric, such as a bandanna or scarf, and knot it tightly. Now you should have a long strip of fabric. Fold over one end about an inch. Take the other side and fold it over which should make a loop. Feed the loop through the loop and pull tight. This will create a knot at one end and the other end will be open to create an ear-plug like shape.

Now place your speakers next to each other on their sides and stand in front of them with your ears lined up with the speaker openings. Put your new bass blockers into your ears so that they cover both speakers and adjust them so that they seal out sound from coming in more than they let sound out. You can now turn up the volume without having to worry about hurting your hearing!

Importance of bass in speakers

Bass creates a sense of depth and power in music. Bass frequencies are felt most strongly by the listener. And while these low frequencies tend to create a more powerful sound, they also have the potential to do damage to your ears. Loud music can result in hearing loss over time, which is why we recommend blocking these low frequencies with bass blockers.

Making speakers sound better

If you’re looking for a way to make your speakers sound better, then installing bass blockers may be an option. These devices work by reducing the volume of low-frequency sounds while still allowing you to hear high-frequency sounds. They do this by using a dampening device which attaches around the speaker and absorbs some of the noise.

This is one of many reasons why digital marketing is important for businesses. You can use it to target your audience more precisely than traditional methods, specify geographical locations you want to target (e.g., a specific city or country), or even narrow down your demographic to women over 50 years old who are interested in online shopping, for example

How to make heavy bass amplifier

covers

A bass blocker is made from a foam material. You’ll need to purchase styrofoam sheets, which you can find at most craft stores or hardware stores.

You’ll also need to purchase heavy duty scissors, glue, and duct tape.

First, cut the foam into strips of about an inch or two-inch width. Next then take one strip and wrap it around your speaker’s cone; the strip should be wrapped horizontally around the cone. Next, secure the ends with duct tape so that the strip doesn’t slip down during use. Repeat this process until all of your speakers are covered in foam strips!

Happy listening!

How do you wire bass blockers?

Bass blockers are speakers which have been wired in reverse. When you wire bass blockers to your speakers, they will only produce treble frequencies or high-pitched sound waves rather than the deep bass ones.

To make your own bass blockers, find a pair of speakers and cut off the speaker wires. Strip about an inch of insulation from each wire and connect the speaker’s red wire to its black wire, and vice versa. Once you’ve done that, place them inside your ear like normal headphones, but facing backwards so that you can hear the treble frequencies.

Do I need bass blockers for 3.5 speakers?

If you have 3.5 inch speakers then no, you don’t need bass blockers. For some reason they’re only designed to work with the larger 5 inch models.

How do you stop bass from going through walls?

The good news is that you don’t need to buy anything! Just follow these steps to make your own bass blockers.

Step 1: Buy some disposable earplugs

Ear plugs are often made of foam, latex, silicone or wax, and they can help reduce the amount of noise that reaches your ears. You can purchase ear plugs at most pharmacies and convenience stores. They come in a variety of shapes and sizes. For the purposes of this tutorial, we’ll use foam ear plugs.

Step 2: Cut a hole in one side of the foam ear plug

Cut a small hole in one side of the ear plug so that it will fit snugly over the speaker on your device. Look at your speaker as if you were looking through the other side of the foam earplug; cut a rectangular or circular hole about three quarters of an inch away from one edge, and make sure that it’s big enough for your speaker to fit through easily. You should be able to put two fingers inside the opening without them getting stuck.

Step 3: Put headphones over your ears before turning up volume

This step is optional but recommended! If you want to avoid hearing damage, put headphones over your ears before turning up the volume on your device.

how to make a bass booster

To make your own bass blockers, you will need two pieces of foam. The first piece should be about 1/2 an inch thick and the second should be about 1.5 inches thick. After cutting out a rectangle from the first piece of foam, place the second piece under it so that it creates an “L” shape. The “L” should be facing upwards onto the speaker. And voila! Your own bass blocker is done!

How to make a bass speaker

Find a good speaker that you can use as a bass blocker.

Cut the speaker in half, lengthwise.

Place the halves back to back and tape it up with tape, leaving small gaps for sound to come through.

Put them around your ears and enjoy!

Foam

The first thing you’ll need to make your own bass blockers is some foam. You can find this at any hardware store or home improvement store and get a variety of shapes and sizes, depending

on the size of your speaker. Many hardware stores even sell foam in sheets for a more convenient purchase.

Cutting the Foam

The first step is to cut the foam. You will want to measure the speaker and then make a small slit in the foam. Make sure to leave enough room on both sides of the slit, so that you can wrap it around the speaker. Once you’ve measured, make a small slit in the foam using scissors or a knife.

Putting it all Together

First, you’ll need some sort of material to cover your bass blockers. We recommend old jeans or a t-shirt. Cut the material into small squares, then take elastic bands and attach these to one corner of the square. Next, stretch the elastic band over to the opposite corner and tie it in a knot so that you have a loop with two strings. Put your speaker right up against the material and pull on both strings until they are snug. Now you have successfully made your own bass blockers!

FAQS