Have you ever worried that your high bass might break your speakers? This is a common question in the car world, and there are many myths about how sound waves affect speakers. The truth is, the effect of sound waves on speakers depends on their specific design. So, rather than worrying about it, find out for yourself what happens when you play music with lots of basses.
Why does bass make a speaker break?
Speakers are designed to handle a certain level of sound pressure, which is measured in dB. For example, you can buy speakers that can take up to 120 dB. But what does this mean? The higher the number, the louder the speaker is capable of playing before it will break. So, even if you have very powerful bass in your car with speakers that can handle 120 dB, they still won’t break.
The reason why many people think bass breaks speakers is because of how we hear sounds. We’re more sensitive to low-frequency waves than we are too high-frequency waves. When listening to music and you turn down the volume on one side of the headphones, all you’ll hear is bass.
This means that when we hear only low-frequency waves for a long period, our ears become less sensitive to them so they start sounding louder than they are.
This trick works because our brain has learned that lower-pitched sounds are often louder than high-pitched sounds – but it doesn’t mean anything has broken!
As long as you don’t play your music at excessively loud volumes for an extended period, there’s no reason why your speakers should break just because of bass!
What is a speaker anyway?
A speaker is a device that converts electrical energy into sound. This means your speakers start working as soon as you plug them in. To work, the speaker needs a power supply or battery and a source of sound input or signal.
Most speakers use magnets and coils of wire to generate the signal from an audio amplifier. The signal is turned into mechanical vibrations by a paper cone attached to two metal wires forming a voice coil. Sound waves then travel out of the speaker, through the air, and into your ears.
What do speakers do in a car?
Speakers are an important part of a car’s sound system. In the front, you have the low-frequency speaker, which is usually a big oval. . In the back, you have the tweeter speakers, which are there for your high-frequency sounds like vocals and horns.
When you turn on your car stereo and crank up the bass, what happens? Speakers with paper cones can’t handle too much power or bass without damage. When they’re overdriven by bass frequencies, they will most likely distort and break down. On the other hand, speakers with metal cones can take more abuse before giving out. However, if you play them at high volumes for long periods – say at an event where you need to be loud – they will also eventually fail due to heat build-up or mechanical wear-and-tear on the voice coil assembly.
So does bass break speakers? The effect of sound waves on speakers depends on their specific design; some speakers can take more abuse than others before breaking down when played at high volumes with powerful bass frequencies.
Related Article: 9 best sealed subwoofers
How much bass can speakers take?
The truth is, bass waves can help speakers. Bass adds more air pressure to the speaker and helps push the sound waves out with higher intensity and volume. Some manufacturers might design speakers for maxing out at a certain frequency range, so they would prefer if you played music that was not too heavy on bass.
The effects of bass on speakers depend on the design of the speaker. For instance, some speakers are made able only to play certain frequencies of sound. If you play music with a lot of basses through these speakers, they can easily be damaged since they aren’t made to handle such frequencies.
No matter how much care taken on your speakers, at some point they will inevitably get beat up. And this is especially true for bass speakers. After all, the louder the bass, the more likely it is to cause speaker distortion. But there are a few ways to protect your speakers from damage and give them a little extra TLC in the process.
And when you see just how much bass power these speakers have, you know that it could only be a matter of time before these drivers start breaking down. As such, here are just a few tips on what you can do to help keep your speakers going strong for years to come!
Tips On Speakers You Can Make Yourself
The speakers you make yourself will be one-of-a-kind and can be more customized than any commercially available option. A DIY speaker will not only sound better than your average run-of-the-mill speaker, but it will also give you a more intimate connection with your music.
- To Check for speaker leak, put your ear up to the grill cloth and listening for sounds coming from outside the cabinet.
2. Wrap some foam around the front of your speaker to dampen reflections that bounce off the walls and into the microphones.
3) Use a dust cover to keep dirt, debris, and pet hair off of your speaker grills. For added protection, you may want to use an acoustic foam material on top of this dust cover. 4) Replace your driver cones every few years or so because they are likely to wear out after time has passed. 5) Give your speakers their own personal space by placing them away from walls, corners, furniture, curtains, etc. 6) Invest in high-quality cables so that you don’t have to replace these too often because bad cords can cause interference at high frequencies.
Treat your speakers with care
It’s not just the bass that can break your speakers. You also have to be careful about how you treat them in everyday life. For example, don’t leave your speakers outside if they’re not waterproof! Water and other substances can quickly damage a speaker and make it sound awful.
Additionally, some people like to crank up their speakers to hear the bass better while others turn the volume down because they don’t want to disturb neighbors or family members. If you’re doing this, it’s important to know that turning the volume up too much will cause distortion. So remember: No one likes a distorted sound!
Get a protective cover
First, you can get a protective cover. This is especially helpful for bass speakers that are out in the elements. Without a cover, your speakers will see a lot of dust and dirt accumulate over time, which can cause driver problems. But with a cover, you’ll be able to keep your speakers clean and they’ll work better for longer!
Second, make sure to remove dust from the speaker regularly. This may seem like an obvious suggestion, but it bears repeating nonetheless. The less dust accumulated on the speaker’s cone, the less likely it will break down from overheating or from sound distortion caused by external vibration.
Thirdly, when transporting your speakers from one place to another try not to set them down too hard or bump them into anything. And finally, always store your speakers upright; never on their side or upside down. When storing them for long periods, make sure you drain any residual power by disconnecting the amplifier’s power cord before storage.
Use speaker stands
One of the best ways to protect your speakers is by using speaker stands. Now, it’s important to note that this is not a solution for every speaker. But if you have a pair of high-powered monitors, speaker stands are essential to keeping these speakers safe from bass breakage.
Speaker stands can help distribute the weight of the speakers over a larger surface area, which means less pressure on the drivers. Speaker stands also allow you to move your speakers around without having to worry about them falling over. The little bit of extra protection afforded by these simple pieces of equipment is well worth the investment!
Add rubber feet to your speaker bases
Adding rubber feet to your speaker bases can help protect your speakers from bass breakage. This is because the rubber feet will spread out the weight of your speakers and help protect them from pressure fractures. And since they are small, these rubber feet are easy to install! All you have to do is take off the base plate on your speaker, attach the rubber feet with screws or adhesive, then replace the base plate with your speaker. If you don’t want to go through that process, then consider placing felt pads over top of the original feet on your speaker.
FAQs
Speakers don’t break just because they are exposed to sound waves, but other factors could damage them. For example, if the speaker is not strong enough it will be damaged by prolonged exposure to high bass, or if the speaker’s power handling is over its limit. If you have a car subwoofer with an amp head unit and tweeters in your vehicle, there is no need to worry about your speakers being damaged by bass. You can adjust the settings of your amp head unit to make sure your subwoofer doesn’t overpower the other speakers.
Yes! Bass waves create heat, which is why you must keep your subwoofers away from any object that will absorb its heat. Heat sinks are great for this purpose as they absorb all of the heat created by the subwoofer. Keeping your subwoofer cool ensures it lasts longer without any issues.
Conclusions.
After examining the various types of speakers, it is clear that many different factors can affect sound waves on your speakers. Some factors have more weight than others when it comes to their effect on speakers.
The design of the speaker is also very important when it comes to how bass affects your speaker. Ultimately, you don’t need to worry about your high bass affecting your speakers as much as you might think. While sound waves can affect speakers, modern designs make them less susceptible to damage from bass frequencies.
