Do Speakers Need Burn-in?

Do Speakers Need Burn-in?

When you buy a new speaker, it’s tempting to just plug it in and start playing your favorite tunes. However, there are some things you should know before you go shoving that speaker into your ears. The truth is that speakers do in fact need burn-in time. But don’t worry! This doesn’t mean they’re burning out. In this article, we’ll cover the benefits of burn-in, how long it takes for speakers to break in, different types of speakers and the best ways to give them the best “break-in” possible.

Related Article:Do speaker cables need burn in

What is Burn-in?

When a speaker is new, the materials are still settling into their final shape. The body of the speaker is vibrating and the sound waves it produces have some distortion. This means that you’re not hearing your speakers at their full potential.

Burn-in time helps smooth out this distortion and help the speaker’s materials settle into their final shape so you can hear your music as it was intended to be heard.

It’s important to note that burn-in may not be necessary or desired for all speakers. For example, if you’re using a home theater system that has a built-in receiver, you won’t need to worry about break-in time because your receiver will take care of any necessary adjustments for you.

Why Do Speakers Need Burn-in?

Speakers need time to break in because of their materials, like rubber and foam surrounds. These materials can settle over time, so the quality of your sound will change as these materials soften. This is where those “break-in” hours come into play. It’s also important to note that speakers are handmade products that require intentional assembly. The burn-in process ensures uniformity among different speakers.

How Long Does It Take For Speakers To Break In?

You might be wondering how long it takes for speakers to break in. That’s a good question! The truth is, the time it takes varies depending on the speaker. Some speakers may require more burn-in time than others. It all depends on the materials used in the loudspeaker and other factors like use, volume and frequency range.

White Noise, Pink Noise and Brown Noise

What is Burn-in?

Every speaker or headphone has a finite lifespan, but the good news is that burn-in isn’t the end of your speaker’s life. In fact, it’s just the opposite. Burn-in refers to a process where you play music on your new speaker for a period of time – usually 24 hours – to ensure the best sound quality. We recommend using white noise, pink noise and brown noise each day for an hour during this process.

See also  How to Keep your Speakers In Phase

Why do Speakers Need Burn-in?

The tiniest components inside a speaker can affect the sound it produces and how long it will last. These components need time to break in, or “settle,” before you’ll get optimal performance from them. If you don’t give speakers sufficient burn-in time, you may notice that they sound too harsh or tinny, and highs may be exaggerated. Burning in your speakers means that you’re going to give them the opportunity to reach their full potential by playing music for a prolonged period of time on them.

When Should You Give Speakers Burn-in Time?

You should give speakers enough time to break in before listening to them at high volumes or when mixing audio for long periods of time, as these are times when they will be most impacted by burn-in effects.

How Long Does It Take For A Speaker To Break In?

It takes anywhere from 8 hours up to 200 hours before speakers will fully break in and

Different Types of Speakers

The better you know your speaker, the easier it will be to break in. Here are a few common types of speakers and how they differ.

– In-ear headphones: You’re going to want to let these babies burn in for up to 100 hours before you start jamming away. This is because they have a very tight seal which can make the sound quality sound muffled at first. They also tend to leak noise more than other types of speakers so you’ll need to keep that in mind when listening in public.

– Earbuds: These tiny little things usually take less than 10 hours of playtime before they start sounding their best. Just don’t forget them when packing for a trip!

– Home stereo systems: If you’ve just bought a new home stereo system, it’s recommended that you let it burn for about five hours before playing music through it.

– Portable Bluetooth speaker: These portable speakers only need about one hour of playtime before the sound is at its best. That’s because their small size allows the speakers to breathe more easily and prevents any sound leakage from affecting the quality of your tunes!

How to Give Your Speaker the Best “Break-in” Possible

To give your speaker the best “break-in” possible, all you need to do is play it for about an hour a day. This will usually take about 20 days for speakers.

See also  Do I need an audio interface for speakers

Digital Burn-In and Audio Burn-In: Digital burn-in is when an electronic device has been on for too long and the pixels start to fade or in some cases cause lines to appear on the screen. Audio burn-in happens when audio equipment is used excessively in a short period of time. The sound quality can change and it’s not uncommon for phasing effects or distortion to occur.

What is the best way to break in speakers?

When you’re first using your new speakers, it’s important to know the best way to break them in.

The truth is that speakers do need some time to break in before they sound their best. This usually takes about 30 hours of use for every 100 hours of usage. But don’t worry, this doesn’t mean that your speakers are going to wear out or wear down from the process! That sounds like a lot of time, so what if you can’t find 30 hours over the next few days?

There is a way around this! You can start by playing music at a moderate volume with no particular song. Then, after 15-20 minutes, play a song at a high volume for another 20 minutes. Continue alternating between songs and medium volumes until you’ve reached the desired burn-in time. Some companies recommend different methods than others–but this method has been proven to work by many people. You’ll be amazed at how much better your speakers sound after they’ve been broken in just once or twice!

Different Types of Speakers and Burn-In Time Requirements

Speakers are all different. From wireless speakers to traditional speakers, each speaker has a different sound and tonal quality that it produces. Burn-in time is different for every speaker and depends on the materials used for the drivers inside of the speaker. Speaker components like tweeters, woofers, amplifiers, and wiring all require different levels of burn-in time to reach their best performance level.

Wireless speakers are one type of speaker that have special requirements when it comes to burn-in time. Wireless speakers have both an amplifier and a transmitter as part of their design. Amplifiers often require a higher amount of burn-in time (50 hours or more) because they’re handling significantly more power than a typical wired speaker and need to be able to handle transient spikes in volume without clipping or distorting. Transmitters also need a moderate amount of break-in time (30 hours) because they rely on inductive coupling between the transducer and amplifier for signal transfer.

See also  Can a violin be strung as a viola

Traditional speakers, on the other hand, need less burn-in time since they don’t use amplifiers or transmitters from a wireless network. Regular wired speakers only demand ten hours’ worth of break-in time before they’re ready to go!

The best way to give your new wireless speaker some serious “break-in” is by playing music with high BPMs (tempos). This will cause your wireless speaker’s driver(s) to vibrate in ways that they


Why do speakers need burn-in time?

Speaker drivers, which are what create the sound, have a manufacturing tolerance. The more you use your speaker, the better it will sound. Burning the speakers in for 10 hours should be enough to break them in and make them sound better

How long does it take for speakers to break in?

It all depends on how much you’re using them. If you keep your speaker at moderate levels with no distortion then it could take up to 100 hours of playtime before they fully break in. However, if you play louder music or blast your speaker with distortion then it can take up to 200 hours of playing time to break in.

What is a good way to give my speaker the best possible “break-in” experience?

Try playing music of different genres at various volumes and keep track of how long each song lasts so that you know when the sound quality has improved significantly. You can also try adjusting various settings like bass and treble as this can help speed up the process. Once your speaker sounds good, switch to another genre and repeat until all of your favorite songs have been played through at various volumes.


When you buy a new set of speakers, it can take anywhere from 1-200 hours of listening before it sounds its best. The required burn-in time will depend on the type of speaker you buy and how often you use it. You can also burn-in your speaker by playing white or pink noise through them for an extended period of time.

Taking the time to burn-in your speaker before using it is an investment that will give you the best sound quality and help prevent premature wear on the components. Your purchase will last longer and your speaker will sound better.